Manual

914G2/IT14G2 Compact Wheel Loader/Integrated Toolcarrier Specications
IT14G2 Operating Specifications
General
Purpose Buckets
Penetration
Buckets
With Bolt-On
Cutting Edge
With Bolt-On
Teeth
With Bolt-On
Teeth and
Segments
With Flush
Mounted Teeth
Rated bucket capacity (§) m
3
1.3 1.4 1.2 1.3 1.3 1.4 1.3
yd
3
1.7 1.8 1.6 1.7 1.7 1.8 1.7
Struck capacity (§) m
3
1.1 1.2 1.0 1.1 1.1 1.2 1.1
yd
3
1.4 1.5 1.3 1.5 1.4 1.5 1.5
Width mm 2401 2401 2424 2424 2424 2424 2434
ft/in 7'10.5" 7'10.5" 7'11.4" 7'11.4" 7'11.4" 7'11.4" 7'11.8"
Dump clearance at full lift and 45° discharge (§) mm 2921 2886 2977 2942 2930 2895 2942
ft/in 9'7" 9'6" 9'9" 9'8" 9'7" 9'6" 9'8"
Reach at full lift and 45° discharge (§) mm 787 823 757 792 779 814 792
ft/in 2'7" 2'8" 2'6" 2'7" 2'7" 2'8" 2'7"
Reach at 45° discharge and 2130 mm (7 ft)
clearance (§)
mm 1426 1443 1351 1368 1375 1390 1380
ft/in 4'8" 4'9" 4'5" 4'6" 4'6" 4'7" 4'6"
Reach with lift arms horizontal and bucket level mm 2151 2201 2090 2140 2139 2189 2140
ft/in 7'1" 7'3" 6'10" 7'0" 7'0" 7'2" 7'0"
Digging depth (§) mm 174 174 155 155 174 174 155
in 6.9" 6.9" 6.1" 6.1" 6.9" 6.9" 6.1"
Overall length mm 6424 6474 6506 6556 6524 6574 6554
ft/in 21'1" 21'3" 21'4" 21'6" 21'5" 21'7" 21'6"
Overall height with bucket at full raise (§) mm 4802 4855 4802 4855 4802 4855 4855
ft/in 15'9" 15'11" 15'9" 15'11" 15'9" 15'11" 15'11"
Loader clearance circle with bucket
in carry position
m 10.40 10.42 10.47 10.50 10.47 10.50 10.49
ft/in 34'1" 34'2" 34'4" 34'5" 34'4" 34'5" 34'5"
Static tipping load straight* (§) kg 5541 5495 5637 5589 5503 5456 5605
lb 12,218 12,116 12,407 12,324 12,134 12,030 12,359
Static tipping load full 40° turn* (§) kg 4792 4750 4882 4840 4754 4712 4855
lb 10,566 10,474 10,765 10,672 10,483 10,390 10,705
Breakout force (§) kg 7865 7435 8456 7965 7920 7481 7979
lb 17,342 16,394 18,645 17,563 17,464 16,496 17,594
8032 8044 7990 8003 8063 8076 7990
17,771 17,737 17,618 17,647 17,779 17,808 17,618
Operating weight* kg
lb
*Static tipping and operating weights shown are for high-speed version IT14G2 and include lubricants, full fuel tank, ROPS cab, 80 kg
(176 lb) operator, standard 250 kg (550 lb) counterweight and 17.5-R25 (L2 equivalent) tires.
NOTE: Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE).
SAE Standards J732 and J742 govern loader rating, denoted in the text by (§).
12