Data Sheet

Complete eTape Assemblies
If you purchase a complete assembly with the polycarbonate tube and housing cap, the 0-5V
module will come pre-calibrated and potted inside the black housing cap. Therefore, there is
no access to the module for re-calibration. There are three wires with the complete assemblies:
red (Vin), Black (Gnd) and White (Vout) as shown below:
Technical Support
If you require technical support for the 0-5V module or eTape liquid level sensor, please contact
our technical support department by email at: [e-mail].
Milone Technologies, Inc - 17 Ravenswood Way - Sewell, New Jersey 08080 - Phone: [phone]
Email: [e-mail] Web: www.milonetech.com
0-5VDC Linear Resistance to Voltage Module
PN-05V00199 REV 2
Innovative Fluid Sensing