Installation & Assembly

PART LIST
HARDWARE LIST
C.
Stretcher
1 pc.
A.
Top
1 pc.
B.
Leg
4 pcs.
Dining Table
A
B
B
B
B
C
D
Leg Assembly
Place Top (A) upside down on a soft cloth.
Assemble legs (B) to Top (A) with Head Cap Bolts,
Spring Washers and Flat Washers. (See Figure 1)
Attach Stretchers (C) and (D) to unit with Wood Screws.
Turn the table to its’ upright position.
To level the table, adjust the adjustable levelers on the bottom of the legs. (See Figure 2)
M4x45
Wood Screw
5 pcs.(+1 extra)
Flat
Washer
8 pcs.(+1 extra)
Spring
Washer
8 pcs.(+1 extra)
D.
Stretcher
1 pc.
Flat Washer
Spring Washer
Head Cap Bolt
Wood Screw
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
M8x90
Head Cap Bolt
8 pcs.(+1 extra)
Figure 2
Figure 1
Frozen precipitation may damage the top. Store inside in freezing weather.Note:
Tools required for assembly : Phillips screwdriver
Tools recommended for assembly :Level