Installation & Assembly

RUNNING HORSE CAMPFIRE RING

Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.

Page 1 / 2

  

A Panel 4

B Bolt 12

C Nut 12

ASSEMBLY

Phillips screwdriver required for assembly, not included.

DO NOT FULLY TIGHTEN THE NUTS & BOLTS BEFORE ASSEMBLING THE ENTIRE RING.

1. Set Panels (A) upright and align the holes on the panels.

2. Connect the panels by hand-tightening 3x Bolt (B) and 3x Nut (C).

3. Repeat Steps 1 & 2 until all panels are connected.

4. Tighten all hardware using a Phillips screwdriver (not included).

• Do not discard packaging until you have checked that all parts are accounted for.

• Assemble components on a soft, clean surface to avoid scratching or damaging

the finish.

• Keep children away during assembly. This item contains small parts that can

be swallowed by children.

• Children should always be under direct adult supervision around this product.

C B

Purchase Date: / / Order/Customer Reference Number:

If you have any questions, comments or concerns, feel free to contact us or via our contact us page

Thank you for choosing. We stand behind our brand and the quality of the items we sell. Replacement

parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used

to determine the cause of defects and for future quality control.

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control.
PAGE 2
CARING FOR YOUR FIRE RING: Installation: Installing a fire-proof border such as bricks, rocks, sand or dirt around the fire ring is recommended. Use on a Safe Surface: Always use fire rings on a non-combustible surface; do not use on a wood deck or other combustible surfaces like grass, leaves, mulch, etc. Do not use fire rings near combustible structures such as vinyl or wood siding. Clean Regularly: All fire rings must be cleaned and inspected periodically.