Instruction manual

SPEED SENSOR
▼ Connect the BW100 TB1 – 7 to the MD - 36A speed sensor terminal:
‘2’ for clockwise speed sensor shaft rotation
‘3’ for counter-clockwise speed sensor shaft rotation.
MD - 36A shaft rotation is viewed from the front cover side
of the MD - 36A enclosure.
▲ If a speed sensor is not used, a jumper must be connected across the BW100
TB1 – 5 / 6. If a speed sensor is used, insure that the jumper is removed.
◆ Input device in the form of open collector transistor or dry contact across
TB1 – 6 / 7 will also serve as a suitable speed signal.
MD - 36A
speed sensor
OR
TASS
speed sensor
INSTALLATION
PL-531 14