Instruction manual

WIRING FORMATS (cont’d)
Power Wiring Detail
1. All wiring must be done in conjunction with approved conduit, boxes and fittings and to procedures
in accordance with all governing regulations.
2. Select either isolated common or chassis ground J1 jumper position. The isolated common
position should be selected if ground loop problems are suspected.
Ensure
jumper J2
connection
matches the
power to be
supplied at
TB3 - 2 / 3
isolated common
OR
chassis ground
Power connection
100 / 115 / 200 / 230 V AC
96/01/09
FIG. 3K
PL-371 12 – 13