Instruction manual

BIC-II TEST DISK
The BIC-II Test Disk (copyright Milltronics 1991) communication test program operates under MS-DOS. This
program tests communication between an IBM PC compatible personal computer, the BIC-II and a Milltronics
product, using simplex convention.
The BIC-II Test Disk is enclosed with the BIC-II in its shipping box.
Refer to your MS-DOS instruction manual for the procedure required to make a backup copy of the
information stored on the BIC-II Test Disk and for proper disk handling, care and storage instructions.
Complete instructions for the use of the BIC-II Test Disk are included on the disk itself.
README
To view these instructions on a video display terminal (VDT) connected to an IBM PC compatible
personal computer:
1) Turn the computer on.
2) Identify the disk drive where MS-DOS is located (e.g. drive C).
3) Insert the BIC-II Test Disk into a 5 1/4" disk drive (e.g. drive A).
4) From the DOS prompt, type in the MORE command, drive letter
(where the BIC-II Test Disk was inserted) and the filename README.TXT.
e.g. C>more<a:readme.txt
5) Press the Enter key.
To print the BIC-II Test Disk instructions on a printer connected to an IBM PC compatible
personal computer LPT1 port :
1) Turn the computer on.
2) Identify the disk drive where MS-DOS is located (e.g. drive C).
3) Insert the BIC-II Test Disk into a 5 1/4" disk drive (e.g. drive A).
4) From the DOS prompt, type in the COPY command, drive letter
(where the BIC-II Test Disk was inserted), the filename README.TXT,
and the computer communication port to which the printer is connected.
e.g. C>copy a:readme.txt lpt1
5) Press the Enter key.
PL-371 11 – 1