User manual

Printing

Overview

A print out can be obtained from a Milli-Q System.

See the paragraphs below for more information.

Hardware

x A parallel port printer cable is needed. The cable has the following

characteristics:

 1 end = 25 pin Db-25 male parallel printer port connection, and

 1 end = 36 pin Centronics male parallel port connection.

x A parallel port printer is needed.

x Contact Millipore for a list of recommended printers.

Printer cable

connection

The printer cable is connected to the Q-POD Base.

Instant Quality

Report

There are 2 types of Instant Quality Reports. These are the:

x Milli-Q Instant Quality Report, and

x the Elix Instant Quality Report.

The Instant Quality Report can be obtained from using the:

x the Main Display, or

x the Q-POD Keypad by pressing

in READY Mode.

Q-POD and

E-POD Units

When the print keypad button is pressed on a:

x Q-POD Unit, the Milli-Q Instant Quality Printout is made, and

x E-POD Unit (an accessory), the Elix Instant Quality Printout is made.

Continued on next page