User manual

40
Installing the Quantum Cartridge
Procedure
Follow the steps below to install a new Quantum Cartridge.
Step Action Diagram
1
x Open the right door of the
Milli-Q System Cabinet.
x Remove the 2 protective caps
located on the ports inside.
2
x Remove the covers on the 2
ports of the Quantum
Cartridge.
x Wet the O-rings with water.
3
x Install the Quantum Cartridge
until it is fully seated.
x Close the right door.
4 One minute later, the Main
LCD shows that a new
Quantum Cartridge is installed.
Continued on next page