User manual

Main Cabinet tubings, cables and power cord, Continued

Powering the

system

x Plug the power cord into the Milli-Q System.

x Plug the power cord into a source of electrical power.

x The Main LCD shows a series of start-up screens.

Alarm

messages

x Because the Milli-Q System is starting with an empty Tank and without a

Progard Pack or Quantum Cartridge installed, there are alarm messages

displayed.

x These alarms are:

 TANK EMPTY,

 PROGARD PACK OUT, and

 QUANTUM CARTRIDGE OUT.

Cancel Alarms

x When an Alarm message is displayed, follow the instructions on the screen

to cancel the text display of the Alarm.

x Cancel the text displays of the Alarm messages:

 TANK EMPTY,

 QUANTUM CARTRIDGE OUT, and

 PROGARD PACK OUT.

Check the date

x When the Alarm messages are cancelled, check that the displayed date is

correct.

x If necessary, go to the Manager Menu Software and correct the date and

time. See the Software Map in the beginning of the Software Chapter for

more information.

x Do not install a Progard Pack or a Quantum Cartridge until the displayed

date is correct.