User manual

26
Specifications and requirements, Continued
Electrical
The electrical specifications and data are found in the table below.
Parameter Value
Voltage
100-230 VAC r10%
Frequency
50-60 Hz r10%
Main Fuse
x 2.5 Amp Fast Acting; 5 mm x 20 mm; 250 V
safety voltage.
x The fuse should be serviced by a qualified
Millipore Service Representative.
Power Used 160 VA
Power Cord Length 2.5 metres
Electrical Ground Earth Grounded
Power Cord use
x The Milli-Q System is powered on and off by
removing the power cord from the wall outlet.
x The power cord should be plugged into a wall
outlet that is accessible.
Continued on next page