User manual

Q-POD Unit, Continued

Display

The Q-POD Display is shown and explained here.

Display - 1

STANDBY and

READY

x STANDBY Mode is used only to access the Maintenance and Manager

Menus.

x READY Mode is the normal mode for Milli-Q Water production and

delivery. The Milli-Q System should be left in READY Mode during

evenings, weekends and other times of non use.

Display – 2

Reservoir Level

x The Reservoir volume is represented by 10 graphic bars.

x Each bar is equal to 10% of the total Reservoir volume.

Display – 3

Values

x Resistivity (M:.cm or PS/cm)

 Product water resistivity or conductivity

x TOC (ppb)

 Product water total oxidizable carbon

x Temperature (°C)

 Product water temperature

x Volumetric dispensing (L)

 Volumetric dispensing value

Continued on next page