User manual

108

Replacing the Progard Pack and Vent Filter, Continued

Placing

Follow the steps below to install a new Progard Pack.

Step Action Diagram

x Remove the covers on the 2

ports of the Progard Pack.

x Look inside the ports.

x Make sure the rubber O-rings

are firmly in place.

x Wet the O-rings with water.

x Push the top of the Progard

Pack into the ports on the

Milli-Q System.

x Push on the bottom of the

Progard Pack.

x Push the Pack Locking

Handle down.

x Close the left door.

Go to the next set of steps to flush the Progard Pack.

Continued on next page