Specifications

3
www.milleruidpower.com
Heavy-Duty Hydraulic Cylinders
HV2 Series
Catalog HY08-M1140-3/NA
Miller Fluid Power
Des Plaines, IL
Milton, Ontario Canada
Specications / Mountings
Standard Specications
• Heavy Duty Service – ANSI/(NFPA) T3.6.7R2-1996
Mounting and Specication Dimensions
• Standard Construction – Square Head – Tie Rod Design
• Nominal Pressure – 3000 PSI
1
• Standard Fluid – Hydraulic Oil
• Standard Temperature – -10° F to +165° F
• Bore Sizes – 1.50" through 6.00"
• Piston Rod Diameter – 0.625" through 4.000"
• Mounting Styles – 17 standard styles at various
application ratings
• Standard – Externally removable bolted bushing assembly
• Strokes – Available in any practical stroke length
• C
ushions – Optional at either end or both ends of stroke.
“Float Check” at cap end.
• Rod Ends – Three Standard Choices – Specials to Order
1
If hydraulic operating pressure exceeds 3000 PSI, send
application data for engineering evaluation and recommendation.
S
ee cylinder pressure ratings page for actual design factors.
In line with our policy of continuing product improvement, specications in this catalog are subject to change.
Mounting Styles
Tie Rods Extended
Head Rectangular Flange
Model 61
Head Square Flange Head Rectangular
Cap Rectangular Flange
Model 62
Cap Square Flange
Cap Rectangular Side Lug
Side Tap Cap Fixed Clevis
Cap Fixed Eye with
Spherical Bearing
Head Trunnion
Cap Trunnion Intermediate Trunnion
(NFPA MF1)
Both Ends Model 51
Cap End Model 52
Head End Model 53
(BOTH ENDS NFPA MX1)
(CAP END NFPA MX2)
(HEAD END NFPA MX3)
Model 65
(NFPA MF5)
Model 67
(NFPA ME5)
(NFPA MF2)
Model 66
(NFPA MF6)
Model 68
(NFPA ME6)
Model 72
(NFPA MS2)
Model 74
(NFPA MS4)
Model 84
(NFPA MP1)
Model 94
(NFPA MPU3)
Model 81
(NFPA MT1)
Model 82
(NFPA MT2)
Model 87
(4.00"-6.00"
bores)
(NFPA MT4)
Intermediate Trunnion
Model 89
2
(NFPA MT4)
2
Reduced rating
3.25"-6.00" bores