Specifications

Heavy-Duty Hydraulic Cylinders
HV2 Series
Catalog HY08-M1140-3/NA
36
www.milleruidpower.com
Miller Fluid Power
Des Plaines, IL
Milton, Ontario Canada
Series HV2
Large Bore
High Pressure Hydraulic Cylinders
SAE Ports are standard. Adjustable, floating,
stepped cushions.
Polypak
®
Primary Seal
End seal design
prevents extrusion.
Chrome plated
piston rod.
Long inboard cast iron
bearing is lubricated
from within.
Hi-Load piston is standard –
with rugged filled PTFE seals
and bearings.
Bolt-on rod gland assembly
simplifies maintenance.
High strength alloy tie rods
made from 125,000 psi
minimum yield strength
material.
Standard Specications
• Heavy Duty Service
• Standard Construction – Square Head – Tie Rod Design
• Nominal Pressure – 3000 PSI
1
• Standard Fluid – Hydraulic Oil
• Standard Temperature –
- 10°F to +165°F
2
• Bore Sizes – 10.00" through 20.00" (Larger sizes available)
• Piston Rod Diameter – 4.500" through 10.000"
• Mounting Styles – Twelve standard styles at various
application ratings
•
Strokes – Available in any practical stroke length
• Cushions – Optional at either end or both ends of stroke
• Rod Ends – Two Standard Choices – Specials to Order
In line with our policy of continuing product improvement, specications in this
catalog are subject to change.
1
If hydraulic operating pressure exceeds 3000 PSI, send application data for
engineering evaluation and recommendation. See pressure ratings page for
actual design factors.
2
See operating uids and temperature range page for higher temperature service.
Features / Specications