Specifications

21
www.milleruidpower.com
Heavy-Duty Hydraulic Cylinders
HV2 Series
Catalog HY08-M1140-3/NA
Miller Fluid Power
Des Plaines, IL
Milton, Ontario Canada
1
If hydraulic operating pressure exceeds 3000 PSI, send application data for engineering evaluation and recommendation.
In line with our policy of continuing product improvement, specications in this catalog are subject to change.
Series HV2
7.00" and 8.00" Bore
Heavy Duty High Pressure Hydraulic Cylinders
• Bolted bushing for ease of maintenance.
• Hi-Load piston is standard.
• Cylinder tube seal groove design and high-strength
tie rods ensure trouble-free performance even in
severe applications.
• Floating cushions with oat-check action and positive
metal-to-metal seal.
Every cylinder is individually tested before it leaves
our plant.
Standard Specications
• Heavy Duty Service — ANSI/NFPA T.3.6.7R2-1996
specications and mounting dimension standards
• Standard Construction — Square Head –
Tie Rod Design
• Nominal Pressure — 3000 PSI
1
• Standard Fluid — Hydraulic Oil
• Standard Temperature — -10° F. to +165° F.
• Piston Rod Diameter — 3.000" through 5.500"
• Mounting Styles — 16 standard styles at various
application ratings
• Strokes — Available in any practical stroke length
• Cushions — Optional at either end or both ends
of stroke
• Rod Ends — Three Standard Choices — specials
t
o order
Optional Piston
Cast iron ring piston is
available as a special
modication.
SAE Ports are standard.
Spanner wrench holes on
5.000" dia. and larger piston
rods for easy installation.
Case hardened chrome
plated piston rod.
Bolted bushing simplifies
maintenance.
Hi-Load piston is standard — with
rugged filled PTFE seals and
bearings.
High strength alloy tie rods made
from 125,000 psi minimum yield
strength material.
Unique end seal design eliminates
extrusion gap.
Adjustable, floating,
stepped cushions.
Features / Specications