Specifications

19
www.milleruidpower.com
Heavy-Duty Hydraulic Cylinders
HV2 Series
Catalog HY08-M1140-3/NA
Miller Fluid Power
Des Plaines, IL
Milton, Ontario Canada
Cap Fixed Eye Mount
with Spherical Bearing
Model 94
Spherical Bearing Mount – 1.50" to 6.00" Bore
1
4
3
2
WF
NR
KK
A
CD
MS
EX
MA
XC + STROKE
ZC + STROKE
F
LUBRICATION
FITTING
1
Maximum operating pressure at 4:1 design factor is based on tensile strength of material. Pressure ratings are based on standard
commercial bearing ratings.
2
Dimension “CD” is hole diameter.
3
To match pin diameter in rod eye and cap, when an oversize rod is required, specify rod end style ‘X’, ‘KK’ thread and ‘A’ thread
length for the standard rod diameter (rst rod listed for the bore), and ‘W’ for the oversize rod. Order the rod eye and clevis bracket
for the required bore size from the tables on the spherical bearings accessory page.
Table 1 — Dimensions
Bore
Rod
Dia.
MM
Thread
3
Style 4
KK A WF
Add Stroke
CD
2
EX MA MS NR
Max.
Oper.
PSI
1
XC ZC
1.50
0.625 7/16-20 0.75 1.00 6.38 7.13
.5000
-.0005
0.44 0.75 0.94 0.63 1500
1.000 3/4-16 1.13 1.38 6.75 7.50
2.00
1.000 3/4-16 1.13 1.38 7.25 8.25
.7500
-.0005
0.66 1.00 1.38 1.00 2200
1.375 1-14 1.63 1.63 7.50 8.50
2.50
1.000 3/4-16 1.13 1.38 7.38 8.38
.7500
-.0005
0.66 1.00 1.38 1.00 14501.750 1 1/4-12 2.00 1.88 7.88 8.88
1.375 1-14 1.63 1.63 7.63 8.63
3.25
1.375 1-14 1.63 1.63 8.63 9.88
1.0000
-.0005
0.88 1.25 1.69 1.25 15002.000 1 1/2-12 2.25 2.00 9.00 10.25
1.750 1 1/4-12 2.00 1.88 8.88 10.13
4.00
1.750 1 1/4-12 2.00 1.88 9.75 11.63
1.3750
-.0005
1.19 1.88 2.44 1.63 18502.500 1 7/8-12 3.00 2.25 10.13 12.00
2.000 1 1/2-12 2.25 2.00 9.88 11.75
5.00
2.000 1 1/2-12 2.25 2.00 10.50 13.00
1.7500
-.0005
1.53 2.50 2.88 2.06 2000
3.500 2 1/2-12 3.50 2.25 10.75 13.25
2.500 1 7/8-12 3.00 2.25 10.75 13.25
3.000 2 1/4-12 3.50 2.25 10.75 13.25
6.00
2.500 1 7/8-12 3.00 2.25 12.13 14.63
2.0000
-.0005
1.75 2.50 3.31 2.38 1800
4.000 3-12 4.00 2.25 12.13 14.63
3.000 2 1/4-12 3.50 2.25 12.13 14.63
3.500 2 1/2-12 3.50 2.25 12.13 14.63