Specifications

Heavy-Duty Hydraulic Cylinders
HV2 Series
Catalog HY08-M1140-3/NA
14
www.milleruidpower.com
Miller Fluid Power
Des Plaines, IL
Milton, Ontario Canada
Mountings – 1.50" to 6.00" Bore Sizes
Cap Fixed Clevis Mount
Model 84
RT
MM
XC + STROKE
G
J L M
LR
MR
CD
EE
LG + STROKE
P + STROKE
ZC + STROKE
Y
WF
4
2
3
1
CB
CWCW
E
E
K
Rod End Dimensions (for Retainer Held Bushings) – See Table 2
“Special” Thread
Style X
Special thread,
extension, rod eye,
blank, etc., are also
available.
To order, specify
“Style X” and give
desired dimensions
for KK, A and W.
If otherwise special,
furnish dimensioned
sketch.
See B&R Table to determine which bore, rod and mount combinations have this feature.
A high strength rod end stud is supplied on thread style 2 through
2.000" diameter rods. Larger sizes or special rod ends are cut threads.
Style 2 rod ends are recommended where the workpiece is secured
against the rod shoulder. When the workpiece is not shouldered,
style 2 rod ends are recommended through 2.000" piston rod
diameters and style 5 rod ends are recommended on larger
diameters. Use style 4 for applications where female rod end threads
are required. If rod end is not specied, style 2 will be supplied.
Thread Style 4
Short Female
Thread Style 5
Intermediate Male
Thread Style 2
Small Male
A
B
W
NA
KK
D WRENCH
FLATS
MM
G
F
V
C
A
B
IM
V
NA
W
D WRENCH
FLATS
MM
GF
C
A
B
KK
W
D WRENCH
FLATS
NA
MM
G
F
V
C
Style 4 stroke
restrictions
may apply.
See Style 4
Minimum
Stroke page
for details.