Owner`s manual

. A complete Parts List is available at www.MillerWelds.com
OM-237 974 Page 26
6-3. Checking Or Replacing Filter Element
! Turn power Off, and discon-
nect input power plug from
receptacle. Check to see that
all diagnostic LEDs have
stopped flashing before
removing wrapper from unit.
Remove wrapper from unit (see
Section 6-2).
1 Filter Base
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
Check filter element for dirt and
moisture, and replace if necessary.
Be sure that all parts are clean and
dry.
Reinstall filter element, and secure
filter cup.
Reinstall wrapper.
805 327-A
Torx 25
Tools Needed:
1
2
3