Owner`s manual

OM-172 324 Page 64

SECTION 11 – CONTROL MENU

The control menu allows the user access to rise time setting that controls rise and fall time of the pulse square wave.

Changing the rise time setting changes the square wave shape by rounding off the corners, and makes it possible to

quiet the pulse arc by just changing the rise time.

11-1. Using Menu Display

1 Front Panel Control Display

Front panel display during control

setting.

2 Pulse Panel Increase And De-

crease Buttons

3 Power Switch On Rear Panel

Press and hold down both buttons

while turning On unit. Release but-

tons when Control appears on the

front panel display.

4 Pulse Panel Control Display

Follow this procedure any time ac-

cess is required. To save any

changes made while in the control

display, and/or to exit the control

display, press Reset button on front

panel.

>Ri se Time >1250 A/ms

Con t r o l

Front Panel Display

Pulse Panel Display

Increase

Button

Decrease

Button