Owner`s manual

OM-172 324 Page 47
SECTION 9 – USING THE OPTIONAL DATA CARD
9-1. Installing Data Card
1 Label
Peel backing from label and apply
to data card with THIS SIDE UP by
metal pins.
Write the names of the programs
stored on the card on the label.
Write the name of the piece of
equipment the card is used with on
the label.
2 Data Card
3 Card Slot
Insert card into slot. To format card,
turn On power to the unit. Select
Card from menu. Data card formats
when unit enters Card mode. Exit
Card mode and turn Off power.
ST-156 266-B / Ref. S-155 823
1
2
3
THIS SIDE UP
1 2 3 4 5 6
7 8 9
10
11
12 13 14
60-M Data Card
9-2. Data Card Displays
Use Mode Select button to select
Card.
1 Card Display
2 Write
Used to transfer program data from
unit to card. The program card can
hold up to 32 programs. When writ-
ing to the card, the next available
program number is automatically
assigned.
3 Read
Used to transfer program data from
card to unit.
4 Delete
Used to delete program data from
card.
5 Done
Used to exit card display.
6 Moving Line
Moving line is under value that can
be changed.
Process
>C a r d
Sequence
Press
Be l ow
#1Pu l se
035” Steel
Argon– Oxy
Press
1
6
>Wr i t e
Read
De l e t e
Done
Parameter
Select Once
2
3
4
5