Owner`s manual

OM-253 906 Page 64
Unit will display PSt on the Voltage display.
7. Adjust postflow time to desired value by rotate the Wire Feed Speed knob.
Available selections include Std and numeric values from 0 to 60 seconds.
8. Press any button to return to the normal display.
6-11. Wire Feeder Left Side Active Setup Example
. Only illuminated controls can be
changed or adjusted.
1 Left Side Controls Active
2 MIG Process Selected
3 Trigger Hold Off
4 Memory Location 1 Active
4
1
2
3
16.5
225
252 620-C