Owner`s manual

OM-2226 Page 57

4-21. Resetting Unit To Factory Default Settings (All Models)

1 Process Switch Pad

2 Output Switch Pad

3 Adjust Switch Pad

4 Power Switch

To reset all welding power source

functions to original factory settings,

turn power off. Push and hold the

Process, Output and Adjust switch

pads and turn On power switch.

Hold switch pads for approximately

7 seconds (or until software version

number _ _ _ _ _ _-_clears displays).

Note: In order to reset unit to factory

default settings, Lockout function

must be turned off (see Section

4-20).

CE Models