Owner`s manual

OM-2226 Page 53
1 Output And Amperage Controls
2 Power Switch
To display the arc timer/counter, turn
power off. Push and hold Output and Am-
perage control switch pads, and turn On
Power switch. Hold switch pads for
approximately 7 seconds (or until soft-
ware version number
_ _ _ _ _ _-_clears displays).
3 Arc Timer Display
Upon power up as described above, the
S LED will turn on, and arc time will be dis-
played for 5 seconds as [000 000] to [999
999). The first four numbers indicate
hours, and the last two numbers indicate
minutes. Arc time shown in example is
read as 1,234 hours and 56 minutes.
Maximum arc time is 9,999 hours and 59
minutes.
4 Arc Counter
After 5 seconds, the A LED turns on, and
the arc counter will be displayed for the
next 5 seconds as [000 000] to [999 999].
The maximum arc cycle count is 999 999.
Rear Panel
2
And
V
1
1
CE Models
123
456
3/4
Or