Owner`s manual

OM-2226 Page 32
4-8. Amperage Control
1 A (Amperage Control)
2 Encoder Control
3 Parameter Display
Press Amperage switch pad, and
turn Encoder control to set weld
amperage (1-200 amps). Weld am-
perage setting is also peak amper-
age when Pulser function is active
(see Section 4-10). Amperage se-
lected is displayed on the parame-
ter display (see Section 4-3) and
the A LED will be illuminated.
1
2
3
1
2
3
CE Models Only