Owner`s manual

OM-2226 Page 26
B. For CE Units (DX/LX Model Shown)
ST-192 889 / ST-802 452
1
23
4
5
6
7
8
9
10
. For all front panel switch pad controls:
press switch pad to turn on light and en-
able function.
NOTE: Green on nameplate indicates a TIG
function, Gray indicates a Stick function.
1 Encoder Control
Use encoder control in conjunction with appli-
cable front panel function switch pads to
change values for that function. See Section
4-2.
2 Parameter Display
See Section 4-3.
3 Voltmeter
See Section 4-3.
4 Process Controls
See Section 4-4.
5 Output Controls
See Section 4-7.
To reconfigure 2T control for use as 4T, 4TE,
Mini Logic control, or Spot control see Sec-
tion 4-14.
6 Amperage Control
See Section 4-8.
7 Adjust Controls
See Section 4-9.
8 Power Switch
Use switch to turn unit On/Off.
9 Pulser Controls (DX And LX Models)
See Section 4-10.
10 Sequencer Controls (DX, LX And All
CE Models)
See Section 4-11.