Owner`s manual

OM-2226 Page 25
SECTION 4 – OPERATION
4-1. Controls
A. Non CE Units (DX/LX Model Shown)
ST-192 885 / ST-802 452
1
23
4
5
6
7
8
9 10
. For all front panel switch pad controls: press
switch pad to turn on light and enable
function.
NOTE: Green on nameplate indicates a TIG
function, Gray indicates a Stick function.
1 Encoder Control
Use encoder control in conjunction with applica-
ble front panel function switch pads to change
values for that function. See Section 4-2.
2 Parameter Display
See Section 4-3.
3 Voltmeter
See Section 4-3.
4 Process Controls
See Section 4-4.
5 Output Controls
See Section 4-7.
To reconfigure 2T control for use as 4T, 4TE, Mi-
ni Logic control, or Spot control see Section
4-14.
6 Amperage Control
See Section 4-8.
7 Adjust Controls
See Section 4-9.
8 Power Switch
Use switch to turn unit On/Off.
9 Pulser Controls (DX And
LX Models)
See Section 4-10.
10 Sequencer Controls (DX, LX
And All CE Models)
See Section 4-11.