Owner`s manual

OM-2226 Page 48
6-3. Arc Timer/Counter Display
1 Output And Amperage Controls
2 Power Switch
To display the arc timer/counter, turn pow-
er switch on, and then press the Amper-
age Control and Output switch pads be-
fore the software version clears the me-
ters, and hold the switch pads until soft-
ware version clears the meters
3 Arc Timer Display
Upon power up as described above, the
meter S LED will turn on, and arc time will
be displayed for 5 seconds as [000 000 ] to
[999 959 ]. The first four numbers indicate
hours, and the last two numbers indicate
minutes. Arc time shown in example is
read as 1,234 hours and 56 minutes. Max-
imum arc time is 9,999 hours and 59 min-
utes.
4 Arc Counter
After 5 seconds, the meter A LED turns
on, and the arc counter will be displayed
for the next 5 seconds as [000 000 ] to [999
999 ]. The maximum arc cycle count is 999
999.
And
1
123 456
3/4
Or
Rear Panel
2
V
Or
1
Or Or