Owner`s manual

OM-2226 Page 34
5-16. Factory Parameter Defaults And Range And Resolution
Parameter Default Range And Resolution
MEMORY 1 1−4
PROCESS
** Stick OCV
TIG HF Impulse
Low OCV
TIG HF Impulse / TIG Lift / Stick
Low OCV / Normal OCV
OUTPUT
**RMT 2T
RMT STD
2T
RMT STD / RMT 2T / ON
RMT 2T can be reconfigured for: 2T / 4T / Mini Logic
/ 4T Momentary / Spot (see Section 6-2C)
A MAIN / PEAK
DC TIG
DC STICK
150 A
110 A
1 − 200 Amps
1 − 200 Amps
Spot Time
***Weld Time
1.0 S
0 S
0.1 − 25.0 Seconds
Dual Range And Resolution
0.0 − 99.9 / 100 − 999 Seconds
PULSER
PPS
PEAK t
BKGND A
Off
100 Hz
40%
25%
ON / OFF
Dual Range And Resolution
0.1 − 9.9 / 10 − 500 Hertz
5 − 95 Percent
5 − 95 Percent
SEQUENCER
INITIAL A
***Initial Time
INITIAL SLOPE t
FINAL SLOPE t
FINAL A
***Final Time
20 A
0 S
0 S
0 S
5 A
0 S
1 − 200 Amps
0.0 − 25.0 Seconds
0.0 − 25.0 Seconds
0.0 − 25.0 Seconds
1 − 200 Amps
0.0 − 25.0 Seconds
ADJUST
PREFLOW
POST FLOW
DIG
0.2 S
10.0 S
30%
0.0 − 25.0 Seconds
0.0 − 50.0 Seconds @ 0.2 Second Resolution
0 − 100 Percent
MAXSTAR:
Amperage
Time
25 A
1 mS
1 − 200 Amps
1 − 200 Milliseconds
** Parameter adjusted using a power up configuration only
*** Parameter used with the automation option (LX models only)