Owner`s manual

OM-2226 Page 48
G. Spot Control Operation
=
rt
SPO
Spot
1
Current (A)
Preflow
Postflow
Timed Spot Weld Amps
Push & Hold
Trigger
1 Spot Function Meter Display
. While in Spot Control, Se-
quencer settings will be ig-
nored and will not be program-
mable.
. When a remote switch is con-
nected to the welding power
source, use the remote switch
to control the weld cycle. Am-
perage is controlled by the
welding power source.
Torch trigger operation is as shown.
Application: To provide a timed
weld. Used for tacking, and thin
sheet joining.
Release Trigger After
Spot Time Is Done