Owner`s manual

OM-2226 Page 38
5-15. Arc Timer/Counter Display
1 Output And Amperage Controls
2 Power Switch
To display the arc timer/counter, turn power
switch on, and then press the Amperage
Control and Output switch pads before the
software version clears the meters, and
hold the switch pads until software version
clears the meters
3 Arc Timer Display
Upon power up as described above, the
meter S LED will turn on, and arc time will
be displayed for 5 seconds as [000 000 ] to
[999 999]. The first four numbers indicate
hours, and the last two numbers indicate
minutes. Arc time shown in example is read
as 1,234 hours and 56 minutes. Maximum
arc time is 9,999 hours and 59 minutes.
4 Arc Counter
After 5 seconds, the meter A LED turns on,
and the arc counter will be displayed for the
next 5 seconds as [000 000] to [999 999].
The maximum arc cycle count is 999 999.
And
1
123
456
3/4
Rear Panel
2
1