Specifications

HTP Versa Spot 7000
Air Cooled
#67000
HTP Versa Spot 7000
Water Cooled
#67000-WC
List $4625.00 | $3,695.00 List $6295.00 | $5,695.00
Versa Spot Welder
36
HTP has been supplying modern collision repair
facilities with state-of-the-art MIG Welders since 1982.
If there is one thing we’ve learned over the years, it’s that
we can have several tools which all perform basically the
same job – with each tool being just a little more
specialized and doing its specific job a bit quicker and
easier. For example, we have sockets, open end
wrenches, box end wrenches and combination wrenches.
They all loosen or tighten nuts and bolts, but each has a
specific application in which it works better.
Which brings us to the HTP Versa Spot 7000 STRSW
welder. A MIG Welder is a tool we all rely on to make
quality welds, and that has served the modern body
shop well. With the introduction of the
Versa Spot 7000, however, the time has come
to introduce an exciting new welder to the
contemporary collision repair facility.
STRSW or Squeeze Type Resistance Spot
Welding has been around for well over 50 years.
Now, with the Versa Spot 7000 STRSW, an
affordable, practical spot welder is within the
reach of practically every one of today’s
collision repair facilities.
The Versa Spot 7000 is a fully digital,
micro-processor-controlled resistance welder.
All you do is set the thickness of the panels
you’re welding. That’s it. The machine then
elects the welding current and the number of
welding cycles necessary to achieve optimum
results! This unique tool allows you to weld
quarter panels, roofs, and core supports both quicker
and with less finishing time than a MIG Welder.
At the center of the Versa Spot 7000 is a heart of
copper. Just like our MIG Welders, the Versa Spot
7000 features a solid copper-wound transformer.
This new spot welder’s 7,000 amps of power means it
can weld panels up to 12 ga thick (.100"). There’s more,
lots more . . . the Versa Spot’s “Pulse Welding” feature
produces better results when welding through primer or
galvanized panels. Our state-of-the-art, spot welding
gun produces 265 lbs of clamping force. The air cooled
cables and spot welding gun means you can work fast –
make 165 welds/hr on 18 ga panels or 215 welds/hr on
22 ga panels in the continuous mode at 7,000 amps.
Optional water cooling increases the duty cycle even
further – make 1000 welds/hr on 22 ga panels or 500
welds/hr on 16 ga panels.
Cart
Included
#67000 - Air Cooled
Shown
37
Versa Spot Welder
The water-cooling option offers fully water-cooled
welding cables and spot welding arms. A water-cooler
attaches to the cart and recirculates coolant through the
spot welding cables and spot welding arms. With eight
optional air-cooled spot welding arms and three water-
cooled spot welding arms available, your Versa Spot 7000
can access many areas other welders can’t get to.
The Versa Spot 7000 is just that – Versatile! Perform
double-sided spot welds with the pneumatic spot
welding gun. Utilizing the Spotter Accessory Kit,
perform single-sided spot welding, stud welding, washer
welding, and star welding for dent pulling, trim rivet
welding, bolt welding, and shrinking.
If you’re looking for a high-quality, easy-to-use, afford-
able STRSW system for your business, then look no
further. The HTP Versa Spot 7000 brings STRSW
technology and productivity into your shop today!
Spots per Hour
Air Cooled Water Cooled
Thickness
20 ga (1.0 + 1.0)
18 ga (1.2 + 1.2)
16 ga (1.5 + 1.5)
Continuous Pulse
200 65
165 50
100 43
Continuous Pulse
1000 340
900 280
550 240
Technical Specifications
Maximum Welding Current 7000 amps
Welding Voltage 8.6 volts
Electrode Pressure @ 110 psi 265 lbs.
Input Voltage 220 volts
Input Amperage 63 amps
Maximum Power 58 kVA
Rated Power 14.2 kVA @ 50%
Maximum Double Sided
1
/8" +
1
/8"
Spot Welding Thickness
Duty Cycle 3%
Welding Cable Length 67"
Input Power Cord Length 8'
Dimensions 25
1
/2" L x 14
1
/4" W x 12
1
/4" H
Weight (Power Supply) 100 lbs.