Specifications

MicroCut 600
#MC25600
List $1449.00 |
List $3150.00 |
Sale $1049.00
Don’t let the small size fool you – the MicroCut 600 is a real
workhorse. It’s 40 amps of power allows you to cut ¼” steel at
over 20 in/min., ” at over 10 in/min. and ½” at 5 in/min! But
it’s small size (15” L x 6” W x 12 ½” H) and light weight (22 lbs)
means you can take this powerhouse anywhere, and inverter
technology means it’s energy efficient – the MicroCut 600 only
needs 30 amps of 220 volt power!
Infinite amperage adjustment lets you keep the raw cutting
power of the MicroCut 600 under control. Dial the current down
to 10 amps to perform precise cuts on thin gauge sheet metal.
Crank the power up to 40 amps for serious frame fabrication
and bracket building. Whatever project you need to tackle, the
MicroCut 600 is up to the task! And whether it’s steel, stainless
steel, aluminum, or any other metal that conducts electricity, the
MicroCut 600 will cut through it like a hot knife through butter.
The 13 ft plasma torch features our new “shoulder contact”
electrode and cutting tip for longer consumable life. This tip
design means the MicroCut 600 starts the arc instantly without
high frequency, so you can start your arc right through rusty and
painted metal, while reducing the possibility of damaging an on board
computer or any other sensitive electrical equipment you might be
cutting near.
And like all HTP equipment, we back the MicroCut 600 with our 90-day,
money-back guarantee – try the machine in your shop for 90 days, if
you don’t like the way it cuts, we will take it back, no questions asked.
And we further back the machine with a one year warranty. When you
compare the MicroCut 600 to the others, you will see there is no
comparison.
MicroCut 875S
#25875S
If you are doing serious fabricating in steel, aluminum or
stainless steel then you need power and lots of it. Whether
it’s an important, large project or a day-in, day-out production
process the MicroCut 875S with its 55 amps of raw cutting
power is up to the task!
Our customers have found plenty of uses for the MicroCut
875S. Some common ones are implement repairs and modifica-
tions, custom aluminum truck beds, and heavy marine
fabrication. These users tell us they prefer the MicroCut 875
because it has the power – and the duty cycle (100% @ 45
amps) – for heavy cutting all day long. If you need to turn a
dumpster into metal corn flakes, then this is the tool for you.
The MicroCut 875S is based on the MicroCut 625’s inverter
technology, proven in the field since 1998. But we put the
machine on a diet – increasing the power by 37% but keeping
the weight the same, making it easy to take this cutter right to
the job. And a 20 ft cutting torch will allow you to get up on
top of equipment if that’s where the cutting needs to take place.
A machine like the MicroCut 875S lets you redefine production
and fabrication techniques. The possibilities are truly staggering!
Just feed it 220 volt power and clean compressed air and it will
easily blast through ¾" solid steel plate at 7 ½"/min and
severance cut 1 " steel. The arc is ignited without high
frequency, extending consumable life while at the same time
eliminating any interference with computers, TV’s or
telephones. And it features automatic arc re-ignition for
cutting expanded metal.
For all its power, the MicroCut 875S is easy to master, its
infinitely adjustable power is easily tamed for even delicate
tasks on mild, stainless or high carbon steel, aluminum, brass,
copper, galvanized, or rusty or painted plate. The MicroCut
875S comes with a two year warranty and a 90-day money-
back guarantee.
Do you need a MicroCut 875S? If your work involves metal, and
you can visualize the need for this tool, the answer is probably
“yes”. The MicroCut 875S . . . it could change the way you
think about metal.
Plasma Cutters & Plasma Cutting Accessories
28
Sale $1799.00
1
8
Plasma
Accessories
29
Plasma Cutters & Plasma Cutting Accessories
HTP Max Dry #25310-2 List $499.00 | Sale $330.00
Our Max Dry is the ultimate in an Air Dryer/Regulator.
Perfect for the serious home shop or in a body shop as a
workstation dryer. Forget those dryers which claim to get 99%
of the water out of the air - the problem is as the air cools off
down line in your air hose, the humidity in the air condenses
and turns into moisture, creating headaches for you. The Max
Dry eliminates the problem - here's how...
The Max Dry is a five stage filtration process all in one - the first
stage is a self draining 5 micron filter - this filters out all liquid
water, liquid oil, dust dirt, rust and pipe scale down to 40
microns.
The second stage is a Coalescing Filter which functions
differently from standard particulate filters. Air flows from inside
to outside through a coalescing media. Small aerosols come in
contact with the fibers in the media. These aerosols unite with
other aerosols caught in the fibers. The aerosols continue to
unite and emerge as a droplet on the outside of the media. The
weight of the droplet allows gravity to drain it away. This system
filters all oil mist, water mist, and submicronic particles down to
.03 microns!
The third stage is what separates this dryer from all the rest! Air
enters this stage and passes through a 70 micron filter. This
filter evenly disperses the air through the 2 quart desiccant bed.
The desiccant removes the humidity from the air to a tempera-
ture of -3° F. This eliminates the possibility of any moisture
condensing in your air lines and being pumped through your
plasma cutter, sander, air ratchet, grinder, or spray gun.
Best of all, the desiccant is reusable. When the desiccant is dry
and ready to absorb moisture, it is a dark blue in color. After the
desiccant has absorbed all the water vapor it can hold, it turns
an orangish clear color. Simply pour the desiccant into a baking
pan, pop it in the oven at 325°, and bake for approximately one
hour. It will turn back to blue and be ready to use again.
Stage 4 and 5 are a final filtration and precise regulator. The
regulator will accurately control the secondary pressure between
2 and 125 psi. The self-bleed venting feature permits use on
dead-end applications.
The Max Dry will eliminate your moisture problem - aren't
your air tools and paint projects worth it?
HTP Super Dry #25300 List $10.99 | Sale $6.99
We’ve looked a long time for a high quality air dryer that
would solve moisture problems for plasma cutters. One that
would be affordable – and we finally found one! I’ve used
this dryer on all kinds of applications – painting, sanding, air
tools, and of course plasma cutting, and have found it to work
great! The secret is the desiccant – it will actually absorb the
humidity from the air, guaranteeing that no moisture gets past
it. Additionally, a sintered bronze element removes all dust
and dirt particles down to 5 microns! Best of all, the filter
changes from a dark blue color when it’s new, to clear when
the desiccant has absorbed all the moisture it can. It’s easy to
tell when to replace the filter.
When you look at the money you have invested in air tools,
plasma consumables, or even a gallon of automotive paint,
the HTP Super Dry is an inexpensive insurance policy.