Specifications

POWERED AIR PURIFYING RESPIRATOR
OM-235 936 Page 10
2-5. Attaching The Connecting Hose
Be sure connecting hose is.
properly installed or contami-
nated air may enter the hel-
met.
Connecting Hose To Blower
Align pins on hose connector (blower
end) with channels in blower recep-
tacle. Insert hose connector into
blower receptacle until snug and
then turn connector 1/8
turn clockwise.
Connecting Hose To Helmets
Equipped With Screw Connector
Insert hose connector (helmet end)
into hood receptacle. Turn hose con-
nector collar clockwise until tight.
Connecting Hose To Helmets
Equipped With Tab Connector
1 Locking Tab
Push hose connector (rectangular
end) into helmet air inlet until hose
locks in position. (Locking tab should
be on outside of helmet air inlet.
 Do not insert hose locking tab in-
to helmet inlet. Locking tab
should be on outside of helmet
air inlet.
Ref. 805 068 / 805 098
1
OR
Screw Connector Tab Connector