Specifications

POWERED AIR PURIFYING RESPIRATOR
OM-235 936 Page 9
2-4. Installing The Air Filter
Do not use the respirator.
without the spark guard
screen, foam prefilter, and
particulate (HEPA) filter
installed.
Replace damaged or dirty air.
filters. Do not wash filters,
clean with compressed air,
or reuse dirty air filters.
 Dispose of used filters at a des-
ignated collection facility.
1 Particulate (HEPA) Filter
2 Foam Prefilter
3 Spark Guard Screen
4 Cover
Install the screen, prefilter, and par-
ticulate filter in cover exactly as
shown.
Install the filter assembly by sliding
the tabs on the cover into the brack-
et on the blower body; push down
on the filter until it “clicks” into posi-
tion.
Ref. 805 096
3
1
2
4