Specification Sheet

SP392 REV.B
17D-1 Carabiner
Description
Miller twist lock carabiners with spring loaded keepers
are used as anchorage connectors. The 17D-1 has a
1” gate opening, and is plated to resist rust and
corrosion.
Materials
Carabiners: Zinc Dichromate Plated
Forged Alloy Steel
Technical
Proof Tested:
3,600 lbs (16kN)
Min Tensile Strength:
5,000 lbs (22.2kN)
Max Working Load:
400 lbs (181kg)
Weight: 8.0 oz.
Certification
Meets or exceeds OSHA 1926.502, ANSI Z359-2007
and CSA Z259.12 requirements.
*ANSI Z359-2007 compliant for connectors which
meet the 3,600lb gate requirements.
………………………………………
Warning!
Carabiner must be closed and locked prior to use.
Inspect before each use. Improper use could result in
serious injury or death.
………………………………………
Toll Free 800-873-5242

Phone [phone]

Fax [phone]

www.millerfallprotection.com
WARNING!
THIS DOCUMENT PROVIDES AN OVERVIEW OF FALL PROTECTION PRODUCTS AVAILABLE FROM MILLER FALL PROTECTION AND CARE HAS BEEN TAKEN TO
ASSURE THE ACCURACY OF THE DATA. IT DOES NOT PROVIDE IMPORTANT PRODUCT WARNINGS AND INSTRUCTIONS. MILLER FALL PROTECTION RECOMMENDS ALL USERS
OF FALL PROTECTION EQUIPMENT UNDERGO THOROUGH TRAINING, AND THAT ALL WARNINGS AND INSTRUCTIONS PROVIDED WITH THE PRODUCTS BE THOROUGHLY READ
AND UNDERSTOOD PRIOR TO EACH USE. FAILURE TO READ AND FOLLOW ALL PRODUCT WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.