Owner`s manual

. A complete Parts List is available at www.MillerWelds.com
OM-242 880 Page 15
4-7. Connecting And Disconnecting Torch
! Turn off power source and
disconnect input power.
1 Torch Connector
2 Quick Connect Collar
3 Nipple
4 Receptacle
5 Securing Pin
To connect torch:
Push torch connector onto
receptacle and quick connect until
collar secures nipple.
Rotate securing pin clockwise to
lock connector to unit.
To disconnect torch:
Rotate securing pin counterclock-
wise to unlock connector from unit.
Push quick connect collar back
towards unit to release nipple, and
pull torch connector away from unit.
. Use supplied hook and loop
strap to manage torch and
work cables.
805 161-A
2
1
3
4
5
4-8. Connecting And Disconnecting Work Cable
Ref. 805 161-A / Ref. 803 475-G
1 Work Cable Receptacle
2 Work Cable Plug
To connect plug, align key with
receptacle keyway and insert into
receptacle. Rotate plug clockwise
(hand tight only) to secure in
receptacle.
To disconnect plug, rotate counter-
clockwise until key aligns with key-
way and pull plug from receptacle.
. Use supplied hook and loop
strap to manage torch and
work cables.
2
1