Specifications

8
Auto-Axcess Power Source
Model
Auto-Axcess
300
Auto-Axcess
450
Auto-Axcess
675*
Rated Output
300 A at 32 VDC,
60% Duty Cycle
(225 A at 29 VDC,
100% Duty Cycle)
450 A at 44 VDC,
100% Duty Cycle
675 A at 44 VDC,
100% Duty Cycle
Voltage
Range
10– 44 V
10– 44 V
10– 44 V
Amperage
Range
5– 400 A
5– 600 A
5– 900 A
Max. Open-
Circuit
Voltage
80 VDC
80 VDC
80 VDC
Dimensions
300 H: 23 in (584 mm)
450 H: 31 in (787 mm)
675 H: 39 in (991 mm)
W: 17 in (432 mm)
D: 22-1/2 in (572 mm)
Net
Weight
116 lb
(52.6 kg)
163 lb
(73.9 kg)
208 lb
(94.3 kg)
Amps Input at Rated Output, 50/60 Hz, 3-Phase
208 V 230 V 400 V 460 V 575 V KVA KW
33 29.7 16.9 14.6 11.6 11.7 11.2
— 60 33.7 28.8 22.8 22.2 23.1
— 89.7 — 43.7 34.8 35.7 34.4
Typical Auto-Axcess
®
Installation (Robotic/Automation Pulsed MIG or Conventional MIG)
Motor Control Cable
20 ft (6.1 m) #300 097
30 ft (9 m) #300 096
50 ft (15.2 m) #300 098
Must be ordered separately.
Auto-Axcess
Power Source
Torch
Must be ordered
separately.
Motoman/Fanuc Motor Mount #300 013
Motor mounts from other robot brands must be supplied
by robot manufacturer or system integrator.
Positive (+)
Weld Cable
Must be ordered
separately.
Negative (–) Weld Cable
Must be ordered separately.
Robot Cell Base
50 ft Work-Sense Cable
Supplied with AA-40GB
Wire Drive Motor Assembly
Should be connected as close
to arc as possible for
optimum performance.
AA-40GB Wire Drive Motor Assembly
*Auto-Axcess 675 is not CSA approved.
Certified to both the Canadian and U.S. Standards for welding equipment.
Learn More at MillerWelds.com/AMS
*This is the wire feed speed range while using MIG. With pulsed MIG, the wire feed speed range may be more limited.
Wire Drive Motor Assembly
AA-40GB Wire Drive Motor Assembly
#195 426 Left-Hand Drive
#195 515 Right-Hand Drive
The AA-40GB Wire Drive Motor Assembly with
OCP (Over Current Protection) is an improved
version of the AA-40G. The motor control cable
now mounts directly to the gas box, reducing
strain on the tachometer wires. OCP provides
another layer of protection in the event a cable
is damaged or shorted, reducing downtime
and motor damage. Motors include a 50 ft
volt-sense lead.
Wire drive motor assemblies do NOT include drive rolls or required Motor Control Cable. These must be ordered separately.
Note: Left- and right-hand drives are determined by facing the wire feed gun outlet.
The Auto-Axcess platform is designed to bring the benefits of digital control technology to manufacturers who currently use analog robot control. When
combined with a Smart Cable (#300 012) and AA-40GB wire drive motor assembly the Auto-Axcess will automatically reconfigure itself to function as a
semi-automatic, thereby providing for single asset management and simplicity.
Contact Robot Manufacturers for fully-digital versions of the Axcess
compatible with specific robot controllers.
Model
AA-40GB
Gas
Valve
Included
and
enclosed
Type of Input
Power
40 VDC (from
Auto-Axcess)
Connection to
Power Source
Motor Control Cable—
20, 30, or 50 ft
(Order separately)
Wire Feed
Speed Range*
50–1400 IPM
(1.3– 35.56 MPM)
AA-40GB
Dimensions
H: 8 in (203 mm)
W:12 in (305 mm)
D: 10 in (254 mm)
Wire Diameter
Range
.035– 3/32 in
(0.9–1.6 mm)
Ship
Weight
23 lb
(10.4 kg)