Specifications
7
Model
AA-40GB
Gas
Valve
Included
and
enclosed
Type of Input
Power
40 VDC
(from Axcess)
Connection to ROI
Motor Control Cable—
20, 30, or 50 ft
(Order separately)
Wire Feed
Speed Range*
50–1400 IPM
(1.3– 35.56 MPM)
AA-40GB
Dimensions
H: 8 in (203 mm)
W:12 in (305 mm)
D: 10 in (254 mm)
Wire Diameter
Range
.035– 3/32 in
(0.9–1.6 mm)
Ship
Weight
23 lb
(10.4 kg)
*This is the wire feed speed range while using MIG. With pulsed MIG, the wire feed speed range may be more limited.
Model
ROI
Type of Input Power
Supplied from
power source
Connection to Motor
Motor Control Cable—
20, 30, or 50 ft
(Order separately)
Connection to Power Source
DeviceNet Interconnecting
Feeder Control Cable —
5, 10, 25, or 50 ft
(Order separately)
Single ROI Dimensions
H: 13 in (330 mm)
W:7 in (178 mm)
D: 7 in (178 mm)
Dual ROI Dimensions
H: 13 in (330 mm)
W:9 in (229 mm)
D: 10 in (254 mm)
Ship Weight
Single ROI
12 lb (5.4 kg)
Dual ROI
15 lb (6.8 kg)
ROI (Remote Operator Interface) Options
Wire Drive Motor Assembly Options
(To be used with Remote Operator Interface.)
Single ROI #195 238
Dual ROI #195 433
The ROI allows the Axcess power supply, wire
drive motor assembly and operator interface (ROI)
to be located in three separate places. This is
desirable for mounting to custom jibs, booms or
other extended-reach applications. Since an ROI
system can incorporate separate components
providing the most flexibility for custom appli-
cations, it’s an ideal way to obtain the many
benefits of the Axcess while retaining an existing
boom or other structural asset. The dual-wire ROI
provides the same functionality as the single,
but controls two separate wire drive motor
assemblies. Four programs are available per side.
Note: For non-Miller boom and jib mounting, see
ROI installation diagram on page 6 and select desired
cable lengths.
Auto ROI #195 239*
(Contact Applications for assistance at
920-954-3814 prior to any new installation.)
The Auto ROI is to be used with an Axcess
power supply with the E-Stop option. Provides
functionality of the ROI, but replaces sequence
and trigger functions with two programmable
inputs and outputs. To be used in simple
dedicated/fixed/hard automation applications.
Features arc established output. Includes 30 ft
cable for wiring to other external devices.
*Requires Axcess power supply with E-Stop function
option. E-Stop is not intended for continuous
interruption applications. Axcess systems require
approximately 30 seconds to reboot or come back
online after recovering from an E-Stop condition.
Note: For non-Miller boom and jib mounting, see
ROI installation diagram on page 6 and select desired
cable lengths.
Axcess
®
ROI Swingarc
™
Boom-Mounted
Wire Feeders
#195 484 12 ft (3.7 m) Single-Wire
#195 434 12 ft (3.7 m) Dual-Wire
#195 346 16 ft (4.9 m) Single-Wire
#195 435 16 ft (4.9 m) Dual-Wire
Swingarc boom-mounted semiautomatic wire
feeders bring an extra dimension of flexibility
and efficiency to high-production MIG welding
stations. You get an effective solution that
maximizes output, especially when dealing with
large weldments and hard-to-reach places.
Dual Swingarc Retrofit Kit #300 032
Kit is required when replacing motors on older
Miller Dual 60 Series Swingarc booms. Provides
all of the Axcess benefits, but maintains existing
dual-boom hardware.
21-ft Trigger Control Cable #300 129
Required when retrofitting non-Miller booms
with an ROI option.
AA-40GB Wire Drive Motor Assembly
#195 426 Left-Hand Drive
#195 515 Right-Hand Drive
The AA-40GB Wire Drive Motor Assembly with
OCP (Over Current Protection) is an improved
version of the AA-40G. The motor control cable
now mounts directly to the gas box, reducing
strain on the tachometer wires. OCP provides
another layer of protection in the event a cable
is damaged or shorted, reducing downtime
and motor damage. Motors include a 50 ft
volt-sense lead.
Wire drive motor assemblies do NOT include drive rolls or required Motor Control Cable. These must be ordered separately.
Note: Left- and right-hand drives are determined by facing the wire feed gun outlet.
Pipe post NOT included.
Must be ordered separately.
• 4 ft Pipe Post with
18 in Base #149 838
• 6 ft Pipe Post with
18 in Base #149 839
DeviceNet Interconnecting Cable NOT included
(required, order separately)
.
MIG gun
(required,
order separately)
.
Single ROI
Dual ROI
ROI does NOT include AA-40GB Wire Drive Motor Assembly, Motor Control Cable or
DeviceNet Interconnecting Feeder Control Cable. These must be ordered separately.
Learn More at MillerWelds.com/AMS
Auto ROI back panel
showing connections for
input and output signals.
3
4