Specifications

5
Wire Feeders
Note: The Invision 354MP power source is equipped
with International-style connectors for secondary
connections. (Power source is shipped with two
50-mm male International-style plugs for use with
#4 to #1/0 AWG size cable.)
International-Style Connector Kit
#042 418 50 mm
Accepts #4 to #1/0 AWG cable size.
Required if male plugs shipped with power
source must be replaced, if additional plugs
are needed.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Required if #1/0 or #2/0 AWG size cable is
to be used.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
recep tacles on the power source.
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #4 to #1/0 AWG size cable.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG size cable.
Used to adapt or extend weld and/or work
cables. Kit includes one male International-
style plug and one in-line female
International-style receptacle.
International/Tweco
®
Adapter #042 465
A one-piece adapter which
has an International-style
male plug (to power
source) on one end and a female Tweco
receptacle (for weld cable connection) on
other end.
International/Cam-Lok
Adapter #042 466
A one-piece adapter which
has an International-style
male plug (to power source) on one end
and a Cam-Lok receptacle (for weld cable
connection) on other end.
International-Style Connectors (Will accept Dinse
™
or other International connectors.)
SuitCase
™
8RC #194 938
SuitCase
™
12RC #194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12in (12RC) spool of wire.
Operates using 14-pin control receptacle.
See Lit. Index No. M/6.5.
70 Series
S-74S #195 057
S-74D #195 058
Wire feeder features
Posifeed
™
wire drive
assembly and
handles a variety of wires up to 1/8 in.
See Lit. Index No. M/3.0.
S-74 DX #195 059
Wire feeder features process and weld
control and handles a variety of wires up
to 1/8 in. See Lit. Index No. M/3.0.
22A Wire Feeder #193 006
Simple, Reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Accommodates up
to a 60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
See Lit. Index No. M/11.0.
XR Control #181 538
Push-pull wire feed system offers
unparalleled performance for aluminum
MIG welding.See Lit. Index No. M/1.7.
Extension Cables for 14-Pin Plugs
to 14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)