Specifications

O
ptima
™
#
043 389
A multipurpose,
m
icroprocessor-based pulse
control for both synergic
M
IG (wire welding or
GMAW) or manual MIG
pulsing. Use this control with
Invision 456 power sources
and any Miller wire feeder, including
automatic feeders and spool guns. Includes
a 25 ft (7.6 m) cord with 14-pin plug.
Extension Cords for Optima
#043 725 25 ft (7.6 m)
#043 726 50 ft (15.2 m)
#043 727 75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin receptacles. For
use with Spoolmatic
30A spool gun.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity reversing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp receptacle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
14-pin plug to 14-pin socket.
Note: Not for use with Optima or 60M Series.
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack
conveniently houses
m
ultiple power
s
ources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of 4 Invision 456 power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
MIGRunner
™
XL Cart #195 246
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles. Carries two 160 lb
(72.6 kg) gas cylinders, or one gas cylinder
and one coolant system.
Cylinder Cart #042 537
Carries two 160 lb (72.6 kg) gas cylinders,
or one gas cylinder and one coolant system.
Feeder mounts to tray above power source.
Wire Feeders/Guns
SuitCase
™
8RC #194 938
SuitCase
™
12RC #194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12 in (12RC) spool of
wire. Operates using 14-pin control
receptacle. See Lit. Index No. M/6.5.
XR-Control #181 538
Push-pull wire feed
system offers unparalleled
performance for aluminum
MIG welding. See Lit.
Index No. M/1.7.
S-74 DX #195 059
Wire feeder features
process and weld
control and handles
a variety of wires up
to 1/8 in. See Lit.
Index No. M/3.0.
60M Series
S-60M #131 794
D-60M #131 796
Semiautomatic
pulsed-MIG and
standard CV-MIG
feeder equipped
with eight synergic pulse programs. Handles
.023 to 1/8 in wires and up to 60 lb spool.
Optional data cards for program storage
and transfer. Pulse arc characteristics are
fully customizable. See Lit. Index No. M/2.4.
Spoolmatic
®
30A #130 831
A 1-lb, air-
cooled spool
gun that extends
the weld process
range by adding a handy portable system
for small wire MIG. Rated 200 A at 100%
duty cycle. Includes 30 ft (9.1 m) cable
assembly. (WC-24 #137 549 for 14 pin.)
3
Genuine Miller Accessories