Specifications

5
Genuine Miller Options
Genuine Miller Accessories
Air Filter Kit #042 939 Field
Reusable air filter helps protect internal
components from dust and dirt, reducing
need for maintenance and providing
extended service life. Easily attaches and
detaches from front of the power source.
Ground Current Sensor #195 048 Field
Disables power source if weld current is
present on primary ground.
Industrial MIG Kit #195 197
Includes 15 ft (4.6 m), 2/0 power cable and
work lead with clamp, regulator/flow meter
with 15 ft (4.6 m) gas hose, 15 ft (4.6 m)
MIG gun and consumable kit.
Remote On/Off Control #042 869
Allows you to turn power source on or off
from a distance of 20 ft (6 m). This is
especially useful if your power source is
located up in a mezzanine.
Polarity Control #042 871
This dual-function control is designed for
use with dual wire feeders or any application
where electrical isolation and/or polarity
reversing of weld current is required. Both
functions can be used at the same time.
Process Control Selector #042 872
Allows you to easily change weld processes.
Also includes features of Polarity Control.
Standard Running Gear #042 886
The large 10 in (254 mm) rear wheels and
5 in (127 mm) front casters on this running
gear provide excellent mobility on the shop
floor, making it easier to move the power
source around and over cables and cracks.
Very easy to install. Handles double as weld
cable holder.
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Water Coolant Systems
For more information, see Miller Coolant
Systems Lit. Index No. AY/7.2.
Coolmate
™
3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated
up to 600 amps. Unique paddle-wheel
indicator, external filter and easy fill spout.
Coolmate
™
V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate
™
4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains
a compound that resists algae growth.
Coolmate 3
Coolmate 4
Coolmate V3