Specifications

Features and Benefits (Common to all Axcess Systems.)
2
HARDWARE (Standard)
Miller’s patented technology allows for any input voltage hook-up (190–630 V) with no manual linking. Assures
rock-solid, consistent output on fluctuating primary lines.
Wind Tunnel Technology
™
Circulates air over components that require cooling, not over electronic circuitry, which reduces contaminants and
improves reliability in harsh welding environments.
1/4-turn steel connectors Allow for faster installation of system and eliminates thread stripping.
Fan-On-Demand
™
Cooling system operates only when needed. Reduces amount of airborne contaminants pulled through the machine.
115 VAC duplex receptacle Provides 10 amp circuit-breaker-protected auxiliary power regardless of primary power.
Dual removable lifting eyes For moving with overhead lifts. Removability allows for flat-top feeder or storage on top.
Forklift slots Slots cut into the frame for forklift transportation.
Matching footprints All models use common stacked power modules allowing small footprint.
Flexible feeding options Several different wire feeding and operator interface options are available and configurable to desired application.
9-pin Palm
™
handheld (PDA) Separate ports provide Axcess with data transfer and optional program downloads.
and 9-pin RS-232 serial
communication port
SOFTWARE (Standard)
Multi-MIG
®
capability Includes common carbon steel, aluminum and stainless welding programs, including new patented Accu-Pulse
®
,
standard or adaptive pulse, conventional MIG and metal core programs using the most popular wire diameters and
gas combinations. Now with Accu-Curve
™
and Accu-Speed
™
.
Accu-Pulse
®
MIG process that delivers precise control of the arc even over tack welds and in tight corners. Provides optimum
molten puddle control for out-of-position welding.
SureStart
™
Provides consistent arc starts by electronically assuring a ball is not left on the wire when welding is stopped. This
provides a predictable condition for the next arc start and combines this with precisely tuned arc starting routines.
Arc Control Control offers a simple way to tailor factory pulse weld programs by adjusting the arc plasma cone to accommodate
a variety of welding applications without the need for any reprogramming or changing any hardware.
Arc Adjust Allows a simple method that controls arc length for pulse processes and wetting action for RMD.
Remote/trigger program select Allows changing weld programs to take advantage of up to 8 programs of Multi-MIG welding process capabilities.
Optional Axcess-able software RMD
™
(Regulated Metal Deposition), Palm
™
Axcess file management system, WaveWriter
™
Palm pulse wave shaping.
py
Process
RMD
™
Regulated
Metal Deposition (Optional)
Standard Spray Pulsed Spray
Accu-Pulse
®
Accu-Speed
™
Accu-Curve
™
Standard
Short Circuit
Flat/Horizontal All Position Performance Thin Materials/Gap Filling
Weld Puddle
Control
Multi-MIG
®
Process Capability—Through Software-Based Programs
“Axcess
®
” the ideal welding process for any
weld joint at hand. Whether you need high travel
speed combined with high deposition rates or
require gaps to be filled, any combination of the
available welding processes can be “Axcess”-ed
either at the start of a welding sequence or
anywhere in the weld while actually welding by
using trigger or remote program select.
For a given wire-feed speed, the chart below
shows from left (hottest) to right (coolest) all
the possible arc mode transfer ranges of
“Axcess”-able MIG processes. This shows
compatible spray gas combinations such as
90 Ar/10 CO
2
(90% Argon and 10% Carbon
Dioxide) on steel using the same wire-feed speed
and also gives an indication of puddle control
characteristics based on arc type selected.
Note: To achieve optimum performance, 4/0 welding power secondary cable is recommended and the supplied work-sense lead must be connected as close to arc as possible.
Learn More at MillerWelds.com/AMS
FREE Hour Trial of RMD
™
with Every New Axcess or Auto-Axcess Power Supply
88
8