Owner`s manual

OM-243 477 Page 39
SECTION 9 − SMAW/CAC-A OPERATION
6
3
4
2
1
9-1. Typical Connection For SMAW And CAC-A Process
Ref. 804 842-B
! Turn off power before mak-
ing connections.
1 Electrode Holder
(Carbon Arc)
For CAC-A process connect car-
bon arc cutting torch to to positive
weld output terminal.
2 Electrode Holder
3 Positive (+) Weld Output
Terminal
4 Remote 14 Receptacle
Connect desired remote control to
remote 14 receptacle as required.
5 Compressed Air LIne
6 Negative (−) Weld Output
Terminal
7 Workpiece
5
7