Owner`s manual

OM-243 477 Page 36

8-6. Typical Connection For Voltage-Sensing Feeder GMAW/GMAW-P/FCAW Process

804 843-B

! Turn off power before mak-

ing connections.

1 Positive (+) Weld Output

Terminal

2 Negative (−) Weld Output

Terminal

3 Ground Cable to Workpiece

4 Workpiece

5 Voltage Sensing Clamp

6 Gun

7 Gun Trigger Receptacle

8 Wire Feeder

9 Gas Hose

10 Gas Cylinder

Use of shielding gas is dependant

on Wire Type.

. The connection diagram illus-

trates DCEP (reverse polarity)

suitable for all wires except

self-shielded FCAW. The ma-

jority of self-shielded FCAW

wires require DCEN (straight

polarity).