Owner`s manual

OM-243 477 Page 31

SECTION 8 − GMAW/GMAW-P/FCAW OPERATION

8-1. Typical Connection For Remote Control Feeder GMAW/GMAW-P/FCAW Process

804 938-A

! Turn off power before making

connections.

1 Remote 14-Receptacle

2 Positive (+) Weld Output Terminal

3 Negative (−) Weld Output Terminal

4 Ground Cable to Workpiece

5 Workpiece

6 Gun

7 Wire Feeder

8 Gas Hose

9 Gas Cylinder

Use of shielding gas is dependant on Wire

Type.

. The connection diagram illustrates

DCEP (reverse polarity) suitable for all

wires except self-shielded FCAW. The

majority of self-shielded FCAW wires

require DCEN (straight polarity).