User's Manual
Table Of Contents
- MeshScape™ RK-5424-5 Reference Kit for 2.4 GHz MeshScape Systems User's Guide
- Contents
- About This Guide
- 1: Introduction
- 2: Installing the MeshScape System
- 3: Running MeshScape Network Monitor
- MeshScape Network Monitor Overview
- Configuring a Node’s Operation
- Labeling an End Node or Mesh Node
- Configuring Persistence Attributes
- Selecting a Com Port on the Host PC
- Configuring Serial and ADC Data Formats
- Turning Event Tracking On/Off
- Broadcasting Data to All Nodes.
- Creating an Event Log File
- Viewing the Contents of an Event Log File
- Viewing MeshScape Statistics
- 4: Using the MeshScape API
- A: Running the Demo Application
- B: Using MeshScape Programmer
- Glossary
- Index
RK-5424-5 Reference Kit User’s Guide vii
For countries not covered by FCC Part 15, Industry Canada RSSS-210, or CE
The RK-5424 -5 Reference Kits are to be used solely by professional engineers for the purpose of evaluating
the feasibility of low-power wireless data communications applications. The user's evaluation must be
limited to use of an assembled Kit within a laboratory setting which provides for adequate shielding of RF
emission which might be caused by operation of the Kit following assembly. In field testing, the assembled
device must not be operated in a residential area or any area where radio devices might be subject to
harmful electrical interference. Distribution and sale of the Kit is intended solely for use in future
development of devices which may be subject to FCC regulation, or other authorities governing radio
emission. This Kit may not be resold by users for any purpose. Accordingly, operation of the Kit in the
development of future devices is deemed within the discretion of the user and the user shall have all
responsibility for any compliance with any authority governing radio emission of such development or use,
including without limitation reducing electrical interference to legally acceptable levels. All products
developed by user must be approved by the authority governing radio emission prior to marketing or sale of
such products and user bears all responsibility for obtaining the approval as needed from any other authority
governing radio emission. If user has obtained the Kit for any purpose not identified above, including all
conditions of assembly and use, user should return Kit to Millennial Net, Inc. immediately.
Trademarks
© 2000 - 2005 Millennial Net, Inc. All rights reserved. Millennial Net
™
, MeshScape
™
, and
Persistent Dynamic
Routing
™ are trademarks of Millennial Net, Inc. All other trademarks are the property of their respective
owners.
Information subject to change.