User's Manual
Table Of Contents
- MeshScape™ RK-5424-5 Reference Kit for 2.4 GHz MeshScape Systems User's Guide
- Contents
- About This Guide
- 1: Introduction
- 2: Installing the MeshScape System
- 3: Running MeshScape Network Monitor
- MeshScape Network Monitor Overview
- Configuring a Node’s Operation
- Labeling an End Node or Mesh Node
- Configuring Persistence Attributes
- Selecting a Com Port on the Host PC
- Configuring Serial and ADC Data Formats
- Turning Event Tracking On/Off
- Broadcasting Data to All Nodes.
- Creating an Event Log File
- Viewing the Contents of an Event Log File
- Viewing MeshScape Statistics
- 4: Using the MeshScape API
- A: Running the Demo Application
- B: Using MeshScape Programmer
- Glossary
- Index
RK-5424-5 Reference Kit User’s Guide 3-17
Configuring a Node’s Operation
Table 3-9. Watch window functions
Item Description Function
A Packets
Received/Sent
Total packets received from or transmitted to the node.
B A-D Channels This panel displays the following information for each analog-to-digital
channel (0–3):
• State: Current on/off state of the channel
• Desired: Desired on/off state of channel, which can be changed
using the Device window.
• Value: Numeric values of the channel.
C DIO Channels This panel displays the following information for each digital channel
(0–3):
• State: Current input/output state of the channel
• Desired: Desired input/output state of channel, which can be
changed using the Device window.
• Value: I/O values of the channel (1 or 0).
• Desired: Desired I/O value of channel.
D Sampling Interval This panel displays the following sampling interval information:
• Current: Currently configured setting.
• Desired: Desired setting, which can be changed using the Device
window (see ’Configuring the Sample Interval of a Single Node’ on
page 3-8).
E Serial Data This panel displays the following serial data information of data received
from the node (In) or transmitted to the node (Out):
• Current: Currently configured setting (Off, RS-232, RS-485)
• Desired: Desired setting
• Length: Length of string received/transmitted.