User's Manual
Table Of Contents
- MeshScape™ RK-5424-5 Reference Kit for 2.4 GHz MeshScape Systems User's Guide
- Contents
- About This Guide
- 1: Introduction
- 2: Installing the MeshScape System
- 3: Running MeshScape Network Monitor
- MeshScape Network Monitor Overview
- Configuring a Node’s Operation
- Labeling an End Node or Mesh Node
- Configuring Persistence Attributes
- Selecting a Com Port on the Host PC
- Configuring Serial and ADC Data Formats
- Turning Event Tracking On/Off
- Broadcasting Data to All Nodes.
- Creating an Event Log File
- Viewing the Contents of an Event Log File
- Viewing MeshScape Statistics
- 4: Using the MeshScape API
- A: Running the Demo Application
- B: Using MeshScape Programmer
- Glossary
- Index
RK-5424-5 Reference Kit User’s Guide 4-41
iBeanAPI_LPR.h
4. ibApi_LPR_GetWakeupAndDutyRatio)
ibApi_FUNC ibApi_LPR_GetWakeupAndDutyRatio(
ibApi_APIHANDLE api_hdl,
ibApi_GROUPID network,
ibApi_UINT32 * wakeup_interval,
ibApi_UINT32 * sleep_interval,
ibApi_UINT32 * duty_ratio
);
This function retrieves the low power router wakeup interval and duty ratio for all devices.
Parameters:
api_hdl: (input) API handle returned from ibApi_Open().
network: (input) Group ID of the network.
wakeup_interval: (output) Wakeup interval in milliseconds.
sleep_interval: (output) Sleep time in milliseconds.
duty_ratio: (output) the duty ratio (5 - 1000), in increments of 5.
Return Value:
ibApi_RESULT_SUCCESS if successful, ibApi_RESULT_ROUNDOFF if round off error detected
or other error code (<0) upon failure.