User's Manual

RK-5424-5 Reference Kit User’s Guide 2-11
Installing the Hardware
MeshGate Extra Long Range default settings
Table 2-3 lists the default settings for the MeshGate Extra Long Range gateway.
* Persisted indicates value is retained after power cycle.
ACT Flashing Gateway detects RF activity. The Activity LED will flash when
detecting valid packets (packets destined for device) and may also
flash when detecting invalid packets (packets destined for other
devices) or environmental noise. Only valid packets are processed
by the device.
Off No RF activity detected.
STS (Reserved for future use.)
Table 2-3. MeshGate Extra Long Range default Settings
Variable
Description Default Value Persisted?*
RS-232 Data Port Configuration RS232
115,200 baud
No parity
No hardware flow control
Yes
Console Port RS232
115,200 baud
No parity
No hardware flow control
Yes
Table 2-2. MeshGate Extra Long Range status LEDs
LED Led State Status